EU Toy Safety Regulation 2025/2509

EU Toy Safety Regulation

Regulation (EU) 2025/2509 establishes a new European Union regulatory framework for the safety of toys.

It strengthens existing requirements in areas including chemical safety, safety assessment, technical documentation, conformity assessment and the responsibilities of economic operators. It also introduces Digital Product Passports and additional provisions supporting market surveillance and online sales.

The Regulation entered into force on 1 January 2026. Most substantive requirements apply from 1 August 2030, when Directive 2009/48/EC on toy safety is repealed.

For toy manufacturers, importers, distributors and suppliers of materials and components, the transition period provides an opportunity to understand the new requirements and assess whether existing product information and compliance processes will support products placed on the market from August 2030.

 

What does the EU Toy Safety Regulation cover?

The Regulation applies to products designed or intended, whether exclusively or not, for use in play by children under 14 years of age, subject to specified exclusions.

It establishes a general safety requirement together with particular requirements addressing physical and mechanical properties, flammability, chemical properties, electrical properties, hygiene and radioactivity.

It also establishes responsibilities for manufacturers, importers, distributors, authorised representatives and providers of online marketplaces.

The framework applies to toys manufactured within the European Union and toys imported from third countries.

 

Current regulatory status

Regulation (EU) 2025/2509 is already legally in force, but its main product requirements do not generally apply until 1 August 2030.

Articles relating principally to conformity-assessment bodies, delegated and implementing powers, enforcement administration and penalties have applied since 1 January 2026.

Until the transition is complete, toys continue to be placed on the European Union market under Directive 2009/48/EC.

Toys placed on the market in conformity with the Directive before 1 August 2030 can continue to be made available afterwards.

EC type-examination certificates issued under the Directive remain valid until 1 February 2031 unless they expire earlier.

Businesses should therefore distinguish between the Regulation being in force and the date on which individual product obligations become applicable.

 

Who is affected?

The Regulation affects organisations across the toy supply chain.

Manufacturers remain responsible for designing and producing toys that comply with the applicable safety requirements, completing the safety and conformity assessments and maintaining the required technical information.

Importers need to verify specified aspects of manufacturer compliance before placing toys from outside the European Union on the market.

Distributors also need to exercise due care in relation to applicable requirements when making toys available.

Businesses selling products under their own name or trademark, or modifying a product in a way that affects compliance, can also assume manufacturer responsibilities.

Material and component suppliers may be affected indirectly because manufacturers require information about the composition and characteristics of materials used in toys.

 

Strengthened chemical restrictions

One of the most significant changes introduced by the Regulation is the expansion of chemical controls.

The Regulation strengthens the existing approach to carcinogenic, mutagenic and toxic for reproduction substances and extends generic restrictions to additional hazard categories.

These include specified endocrine disruptors, substances with specific target organ toxicity, respiratory sensitisers and certain skin sensitisers.

The provisions include specific exclusions, derogations and conditions that need to be considered when assessing individual substances and uses.

For manufacturers and suppliers, this increases the importance of understanding both the hazard classification and actual presence of chemicals within toy materials and components.

 

PFAS in toys

The Regulation prohibits the intentional use of per- and polyfluoroalkyl substances, commonly referred to as PFAS, in toys, toy components and micro-structurally distinct parts of toys.

Specified provisions address circumstances including components necessary for electronic or electrical functions where the substances are fully inaccessible to children.

The Regulation also distinguishes intentional use from technically unavoidable, non-intended presence arising from impurities or manufacturing processes.

For organisations, this means that assessing PFAS compliance can involve more than confirming whether PFAS have been deliberately specified.

Businesses may need reliable information about materials, additives, coatings, manufacturing processes and upstream suppliers to understand the regulatory position.

 

Bisphenols and other substances

Specified bisphenols are also prohibited under the new framework.

The Regulation contains additional controls and limit values relating to other substances, including particular metals, monomers, preservatives and allergenic fragrances.

The applicable regulatory position depends on the substance, toy, intended use and relevant provisions of the Regulation.

A portfolio or material review therefore needs to consider both the generic hazard-based prohibitions and substance-specific requirements.

 

Chemical safety assessments

Manufacturers must undertake a safety assessment before placing a toy on the market.

The assessment addresses chemical, physical, mechanical, electrical, flammability, hygiene and radioactivity hazards and potential exposure.

For chemical hazards, the new Regulation specifically requires consideration of potential exposure to individual chemicals and known additional hazards arising from combined exposure to different chemicals present in the toy.

The assessment also considers the possible unintended presence of substances subject to relevant chemical restrictions.

For manufacturers, this places greater emphasis on the quality of information used to understand chemical composition and exposure.

 

Technical documentation and chemical information

Technical documentation provides the evidence supporting conformity.

Under the Regulation, this includes a description of the design and manufacture of the toy, components and materials used, substances and mixtures used and relevant Safety Data Sheets obtained from chemical suppliers.

It also includes the safety assessment, conformity-assessment information and relevant testing or certification evidence.

For organisations managing complex product portfolios, this increases the importance of consistent supplier information and documentation.

Material or component changes should also be considered in terms of whether they affect the underlying compliance evidence.

 

Conformity assessment

Manufacturers need to demonstrate that toys comply with the Regulation’s essential safety requirements.

Where relevant harmonised standards or common specifications fully cover the applicable requirements and are used appropriately, internal production control can provide the conformity-assessment route.

Where those conditions are not met, or where the nature, design, construction or purpose of the toy warrants third-party verification, EU-type examination and the relevant conformity procedure can be required.

Conformity assessment should therefore be considered alongside the safety assessment and product evidence rather than as a separate administrative step.

 

CE marking

Toys made available on the European Union market will continue to bear the CE marking.

The marking indicates that the manufacturer has taken responsibility for demonstrating compliance with applicable requirements.

The Regulation also retains requirements governing the visibility, legibility and placement of the marking.

CE marking therefore continues under the new Regulation alongside the new Digital Product Passport framework.

 

Digital Product Passports

From 1 August 2030, manufacturers must create a Digital Product Passport for a toy before placing it on the market.

The passport corresponds to a specific toy model and contains specified product, manufacturer and compliance information.

It must be accurate, complete and kept up to date, and it must remain available for 10 years after the toy is placed on the market.

The passport is connected to the product through a data carrier and specified information must also be uploaded to the European Union Digital Product Passport registry before the toy is placed on the market.

For businesses, implementation will require regulatory information, product identification and digital systems to work together.

 

Supply-chain information and traceability

The Digital Product Passport does not remove the need for the underlying compliance evidence.

Manufacturers will continue to need sufficient information about materials, components and chemicals to complete safety assessments and technical documentation.

Importers and distributors have responsibilities relating to product identification, compliance information and the availability of required documentation.

For suppliers, customer information requests may therefore become more detailed as manufacturers prepare for the 2030 framework.

Early assessment can help identify where existing product-data systems and supplier declarations are sufficient and where additional evidence may be required.

 

Online marketplaces and distance sales

The Regulation also introduces toy-specific requirements relevant to online marketplaces.

Online interfaces need to enable specified information to be displayed to potential customers, including the CE marking, relevant warnings and access to the Digital Product Passport.

These requirements sit alongside wider European Union legislation governing online platforms and product safety.

For organisations selling toys through digital channels, product compliance information therefore needs to remain consistent across the physical product, technical documentation and online listing.

 

Connected and AI-enabled toys

Connected toys and toys incorporating artificial intelligence can be subject to other European Union legislation in addition to toy safety requirements.

Depending on the product, the Artificial Intelligence Act, Cyber Resilience Act and radio equipment requirements may also be relevant.

The Toy Safety Regulation requires manufacturers to take account of children’s particular vulnerabilities when assessing hazards for toys falling within the relevant legislation.

Businesses developing connected products should therefore consider the applicable regulatory frameworks together when planning compliance.

 

Northern Ireland

Regulation (EU) 2025/2509 is a replacement European Union act under the Windsor Framework and applies in Northern Ireland for relevant purposes.

Most new substantive product requirements apply from 1 August 2030.

This means businesses supplying Northern Ireland need to prepare for the same strengthened chemical requirements, Digital Product Passport framework and other relevant European Union toy requirements.

For organisations also supplying Great Britain, the Great Britain regulatory position should be assessed separately.

 

What should organisations consider now?

Organisations should begin by identifying which products will remain on the market beyond the transition and which new products are likely to be placed on the European Union or Northern Ireland markets from August 2030.

Chemical composition and supplier data are likely to be important areas for early review, particularly where toys use complex materials, coatings, electronics or recycled materials.

Businesses should consider whether they have sufficient information to assess PFAS, bisphenols and the broader hazard categories covered by the Regulation.

Existing safety assessments and technical documentation can also be reviewed against the new requirements.

Manufacturers should additionally consider how Digital Product Passport information will be created, verified, maintained and linked with existing product-data systems.

 

How RPA can support organisations with the EU Toy Safety Regulation

RPA can support organisations in interpreting the new Toy Safety Regulation and identifying the requirements relevant to particular products, materials and supply-chain roles.

For chemical restrictions, RPA can help organisations assess the regulatory status of substances used in toys, understand the scope of new restrictions and evaluate interactions with wider chemicals legislation.

RPA can also support review of chemical and material information, identification of evidence gaps and assessment of the information needed from suppliers to support safety and compliance decisions.

For organisations preparing for the 2030 transition, RPA can help assess regulatory priorities, consider implications for product portfolios and supply chains and monitor further implementing and delegated measures.

Where regulatory decisions involve scientific, economic or commercial considerations, RPA can bring these perspectives together to support proportionate implementation planning.

 

External links

Regulation (EU) 2025/2509 on the safety of toys

European Commission information on the new Toy Safety Regulation

Northern Ireland Assembly scrutiny of Regulation (EU) 2025/2509