EU Safety Data Sheets: REACH Requirements

Safety Data Sheets in the European Union

A Safety Data Sheet (SDS) is a core part of chemical hazard communication. It brings together information on a substance or mixture, its classification and composition, the measures needed for safe handling and use, and relevant environmental, transport and regulatory information.

For products supplied in the European Union, SDS requirements are established principally under the European Union Registration, Evaluation, Authorisation and Restriction of Chemicals Regulation (EU REACH). Classification and label information within the SDS also needs to reflect the European Union Classification, Labelling and Packaging Regulation (EU CLP).

An effective SDS needs to work as a coherent document. Classification, composition, exposure controls, toxicological information, environmental information, transport information and regulatory references should be consistent with one another and with the product being supplied.

The document also needs to reflect the Member State and supply arrangements in which the substance or mixture is placed on the market.

 

When is a Safety Data Sheet required?

Article 31 of EU REACH establishes the circumstances in which a supplier must provide an SDS.

This includes where a substance or mixture meets the criteria for classification as hazardous under EU CLP, and where a substance meets specified criteria relating to persistent, bioaccumulative and toxic or very persistent and very bioaccumulative properties.

An SDS is also required for substances included on the REACH Candidate List for reasons specified by the Regulation.

In certain circumstances, a recipient can request an SDS for a mixture that is not itself classified as hazardous but contains specified hazardous substances, substances of very high concern or substances for which European Union workplace exposure limits apply.

Whether an SDS is required therefore depends on the product, its classification and composition, its regulatory status and the circumstances in which it is supplied.

 

The 16 sections of an EU Safety Data Sheet

EU REACH requires an SDS to follow the standard 16-section format:

  1. Identification of the substance or mixture and of the company or undertaking
  2. Hazards identification
  3. Composition and information on ingredients
  4. First-aid measures
  5. Fire-fighting measures
  6. Accidental release measures
  7. Handling and storage
  8. Exposure controls and personal protection
  9. Physical and chemical properties
  10. Stability and reactivity
  11. Toxicological information
  12. Ecological information
  13. Disposal considerations
  14. Transport information
  15. Regulatory information
  16. Other information

The standard structure makes information easier for recipients to locate, but completing all 16 headings does not itself demonstrate that an SDS is adequate.

The underlying information needs to be accurate, current, internally consistent and appropriate for the substance or mixture being supplied.

 

Current EU Annex II requirements

The detailed requirements for compiling an SDS are set out in Annex II to EU REACH.

Commission Regulation (EU) 2020/878 replaced Annex II with the current framework and has applied since 1 January 2021. The transitional period during which older-format SDSs could continue to be supplied ended on 31 December 2022.

The current Annex II introduced or strengthened requirements in areas including nanoforms, endocrine-disrupting properties and additional classification-related information.

Where relevant, an SDS needs to identify nanoforms covered by the document and link the appropriate safety information to them.

The framework also requires relevant information on endocrine-disrupting properties where the applicable criteria are met.

Businesses should therefore be cautious about relying on SDS templates or inherited documents that have not been reviewed against the current Annex II requirements.

 

Competence and quality of preparation

Annex II requires the SDS to be prepared by a competent person who takes account of the specific needs and knowledge of the intended audience as far as these are known.

Suppliers must ensure that competent persons have received appropriate training, including refresher training.

This requirement reflects the technical nature of an SDS. Preparing one is not simply an exercise in populating predetermined fields.

The person compiling the SDS needs to understand how the information in different sections relates to the classification, composition, properties and safe use of the substance or mixture.

The information should also be written clearly and precisely so that recipients can understand the hazards and the measures needed for safe storage, handling and disposal.

 

Consistency across the Safety Data Sheet

One of the most important aspects of SDS preparation and review is consistency between sections.

The classification in Section 2 needs to be supported by the relevant substance or mixture information. For mixtures, the composition reported in Section 3 can be fundamental to determining the resulting classification.

The identified hazards should in turn be reflected appropriately in areas such as first aid, firefighting measures, handling and storage, exposure controls and toxicological and ecological information.

Physical and chemical properties can be relevant to classification, safe handling and transport. Regulatory information should reflect the current status of the substance or mixture.

A revision to one part of the document can therefore require consequential changes elsewhere.

Reviewing an SDS requires assessment of the document as a whole rather than checking individual sections independently.

 

Classification and composition

Classification is central to an SDS because it determines the hazards that need to be communicated and influences information throughout the document.

For substances, this can require consideration of available hazard information together with any applicable harmonised classification under EU CLP.

For mixtures, classification can depend on the classifications and concentrations of constituent substances, available information on the mixture itself and the relevant classification methods.

Section 3 has separate disclosure requirements. The substances that need to be identified, their concentrations or concentration ranges and associated classification information need to be determined according to the applicable rules.

Problems can arise where ingredient information changes but the classification is not reconsidered, or where different supplier SDSs provide inconsistent information for the same constituent.

The appropriate technical and regulatory position should be established rather than simply reproducing information from an existing document.

 

Technical information throughout the SDS

Many SDS sections require technical information rather than standard wording.

Sections 4 to 8 address first aid, firefighting, accidental release, safe handling, storage and exposure controls. The advice provided should reflect the properties and identified hazards of the product.

Sections 9 to 12 cover physical and chemical properties, stability and reactivity, toxicological information and ecological information. These sections may require evaluation of scientific information and can directly support the hazard assessment.

Sections 13 to 15 address disposal, transport and regulatory information and can bring other regulatory frameworks into the SDS.

The quality of the final document depends on these sources of information being brought together consistently.

 

Chemical Safety Reports and exposure scenarios

Where a Chemical Safety Report has been prepared under EU REACH, relevant information in the SDS needs to be consistent with the assessment.

Where exposure scenarios are required, the relevant exposure scenarios are provided with the SDS and describe the conditions of use and risk-management measures under which identified uses can be carried out safely.

This relationship is important because the registration dossier, Chemical Safety Report and supply-chain communication should not present conflicting information.

Recipients may in turn need to consider whether their uses and conditions of use are covered by the information communicated to them.

 

Language requirements

An EU SDS must generally be supplied in an official language of the Member State in which the substance or mixture is placed on the market, unless the Member State concerned provides otherwise.

A business supplying the same product in several Member States may therefore need more than a translation of a single master document.

Language requirements need to be considered alongside national supplier information, emergency arrangements, occupational exposure information and other market-specific elements.

Translations should also preserve the technical meaning of the original document. An inaccurate translation can alter the meaning of hazard or risk-management information even where the underlying technical assessment is correct.

 

Supplier and emergency information

Section 1 identifies the product, relevant uses, the supplier of the SDS and emergency contact information.

Supplier information should reflect the legal and supply-chain arrangements through which the product is placed on the relevant European Union market.

Emergency telephone information also needs to meet the applicable requirements and identify relevant limitations on availability where necessary.

These elements form part of the regulatory SDS and should not be treated as administrative details added after the technical sections have been completed.

Where products are supplied through different legal entities or into multiple Member States, Section 1 can therefore require specific review.

 

Alignment between the SDS and product label

The SDS and product label perform different functions, but the regulatory information they contain needs to be consistent.

The classification and label elements reported in Section 2 should correspond with the applicable EU CLP classification and hazard labelling.

Product identifiers also need to be considered across both documents.

A change to classification may therefore require both the SDS and label to be updated. Supplier arrangements can create further points requiring review when a product is introduced into a new market.

A technically correct SDS combined with an inconsistent label, or vice versa, can still create a compliance problem.

For products undergoing classification or market changes, reviewing the two outputs together can therefore be valuable.

 

When should an EU Safety Data Sheet be updated?

Article 31 of EU REACH requires an SDS to be updated without delay in specified circumstances.

These include when new information becomes available that may affect risk-management measures, when new information on hazards becomes available, when an authorisation is granted or refused or when a restriction is imposed.

Other developments can also make review necessary, including changes to composition, revised classifications, new scientific information, changes in occupational exposure limits, new supplier arrangements or entry into additional markets.

When an SDS is revised, the effect of the change should be considered across the whole document.

A new classification, for example, can affect not only Section 2 but also composition information, handling and storage, exposure controls, toxicological information, environmental information, transport classification and regulatory references.

SDS maintenance is therefore an ongoing regulatory activity rather than an exercise completed when the first version is issued.

 

Reviewing existing Safety Data Sheets

Existing SDSs can accumulate inconsistencies over time, particularly where documents have been repeatedly updated, translated or adapted between markets.

A review may identify outdated classifications, incomplete composition information, technical data that no longer reflect the formulation, incorrect supplier or emergency information, inconsistencies with the label, obsolete regulatory references or transport information requiring reassessment.

The appropriate depth of review depends on the product and the reason for the assessment.

Targeted changes may be sufficient where the technical basis remains sound. Where formulation, classification or underlying evidence is uncertain, a more substantial reassessment may be necessary before the SDS can be updated reliably.

For larger portfolios, a structured review can also identify recurring problems and improve consistency between products.

 

Products supplied in both the European Union and Great Britain

EU REACH and UK REACH now operate as separate regulatory systems.

Although their Safety Data Sheet frameworks share a common origin and remain similar in many respects, businesses should not assume that an EU SDS is automatically suitable for Great Britain or that a Great Britain SDS satisfies EU requirements.

Differences can arise in classification, regulatory references, supplier information, occupational exposure information and other market-specific requirements.

For products supplied in both markets, maintaining a common technical evidence base may be efficient, but each regulatory output should be reviewed against the requirements applying in the jurisdiction where the product is supplied.

Northern Ireland should also be distinguished from Great Britain because EU REACH continues to apply in Northern Ireland.

 

What should businesses consider?

Businesses preparing or reviewing an EU SDS should establish whether an SDS is legally required, which legal entity is supplying the product and in which Member States the product will be placed on the market.

The underlying composition and classification should be current and the information across the 16 sections should form a coherent technical description of the product.

Businesses should also check language requirements, supplier and emergency information, relevant occupational exposure information and whether the document reflects the current Annex II requirements.

Where an SDS has been inherited from another supplier or adapted repeatedly, reviewing the technical basis of the document may be more useful than simply updating its format.

 

How RPA can support EU Safety Data Sheets

RPA supports organisations with the preparation, review and updating of Safety Data Sheets for substances and mixtures.

This can range from assessment of an existing document to review of the technical and regulatory information needed to prepare or substantially revise an SDS.

RPA can assess classification and composition information, review consistency across the 16 sections and consider regulatory and market-specific requirements.

For products supplied in both the European Union and Great Britain, RPA can assess the two regulatory outputs separately so that jurisdiction-specific differences are identified rather than assumed away.

The objective is not simply to produce a document containing the prescribed headings. It is to provide an SDS that accurately reflects the product, is internally consistent and addresses the regulatory requirements applying in the market in which it is supplied.

 

External links

EUR-Lex — Regulation (EC) No 1907/2006
https://eur-lex.europa.eu/eli/reg/2006/1907/oj

EUR-Lex — Commission Regulation (EU) 2020/878
https://eur-lex.europa.eu/eli/reg/2020/878/oj

European Chemicals Agency — Guidance on Safety Data Sheets
https://echa.europa.eu/guidance-documents/guidance-on-reach